Bitte benutzen Sie diese Referenz, um auf diese Ressource zu verweisen: doi:10.22028/D291-23750
Titel: Synthesis of nanosized BaSnO 3 powders
VerfasserIn: Lü, Wensheng
Sprache: Englisch
Erscheinungsjahr: 2002
Quelle: Zugl. im Buchhandel: Aachen : Shaker, 2002. - ISBN 3-8322-0939-5
Kontrollierte Schlagwörter: Bariumstannat
Nanostrukturiertes Material
Pulverherstellung
Hydrothermalsynthese
Freie Schlagwörter: barium stannate
nanocrystalline material
hydrothermal synthesis
powder synthesis
DDC-Sachgruppe: 660 Technische Chemie
Dokumenttyp: Dissertation
Abstract: The metal alkoxide route for preparing nanocrystalline BaSnO3 powders has been developed for the first time. Derived from the synthesized bimetal alkoxide precursor BaSn(OPri)6, BaSnO3 with a particle size of 20 to 60 nm has been obtained. Due to the high phase transformation temperature (above 550°C) the particles are strongly agglomerated and the specific surface area of the powder is only 17.0 m²/g. Therefore, a hydrothermal synthesis technique for preparing nanosize BaSnO3 powders with a higher surface area and a lower aggregation degree has been developed. The reactivity of the SnO2.xH2O precursor in this technique is found to be dependent on the pH value. The influence of the concentration of Ba(OH)2, the Ba:Sn ratio, the temperature and duration of hydrothermal reaction and the solvent on the properties and the structure of the resulting powder has been studied. To minimize the agglomeration and aggregation, the precursor SnO2.xH2O is peptized with ammonia and modified with Genapol X-080, respectively. The SnO2.xH2O precursor becomes narrowly dispersed with a particle size of ca. 8 nm via peptization. Through modification the specific surface area of the obtained BaSnO3 has been increased to over 50 m²/g by optimizing the concentration of the surfactant. The BaSnO3 powder with a maximal specific surface of 57.0 m²/g has been obtained by combination of modification and peptization thanks to the limitation of agglomeration and the decreased particle size (10 to 30 nm). A densified ceramic tape has been fabricated at 1500°C through redispersing BaSnO3 with TEA and thereafter tape casting. The solid solution region of BaSbxSn1-xO3 exists for 0 &#8804; x < 0.12. The conductivity of BaSnO3 is improved by doping 10 at.% Sb5+.
Es wurde zum ersten Mal eine Alkoxid-Route zur Synthese von nanokristallinem Bariumstannatpulver entwickelt. Ausgehend vom synthetisierten Bimetallalkoxidprecursor BaSn(OPri)6, wurde das BaSnO3 mit einer Partikelgröße von 20 bis 60 nm hergestellt. Aufgrund der hohen Phasentransformationstemperatur (über 550°C) sind die Partikeln stark aggregiert, und die spezifische Oberfläche des Pulvers beträgt nur 17,0 m²/g. Deshalb wurde eine Hydrothermalsynthesetechnik zur Herstellung der Nano-Bariumstannatpulver mit einer höheren Oberfläche und einm niedrigeren Aggregationsgrad entwickelt. Die Reaktivität des Precursors von SnO2.xH2O in dieser Technik wurde gefunden, von dem pH-Wert abhängig zu sein. Es wurden die Einflüsse der Konzentration von Ba(OH)2, des Verhältnis von Ba:Sn, der Temperatur und dauer der Hydrothermalreaktion sowie des Lösungsmittels auf die Eigenschaften und die Struktur der erhaltenen Pulver untersucht. Zur Minimierung der Agglomeration und Aggregation wurde der Precursor von SnO2.xH2O entweder mit Ammoniak peptiziert oder mit Genapol X-080 modifiziert. Pber Peptization wurde das Precursor von SnO2.xH2O auf der Nano-Ebene (ca. 8 nm) dispergiert. Per Modifikation hat die spezifische Oberfläche des hergestellten Pulvers durch Optimierung der Konzentration des Modifikators auf über 50 m²/g zugenommen. Das Bariumstannatpulver mit einer maximalen spezifischen Oberfläche von57.0 m²/g wurde durch Kombination von Peptization und Modifikation hergestellt. Dadurch wurde die Agglomeration und Aggregation im Pulver beschränkt, und die Partikelgröße auf 10 bis 30 nm verkleinert. Eine dichte Keramikschicht wurde bei 1500°C durch Redispergierung von BaSnO3 mit TEA und demnach Foliengießen hergestellt. Der Festflüssigbereich von BaSbxSn1-xO3 befindet sich in 0 &#8804; x < 0.12. Die Leitfähigkeit des mit 10 at.% Sb5+ dotierten Bariumstannats wurde verbessert.
Link zu diesem Datensatz: urn:nbn:de:bsz:291-scidok-2585
hdl:20.500.11880/23806
http://dx.doi.org/10.22028/D291-23750
Erstgutachter: Schmidt, Helmut
Tag der mündlichen Prüfung: 25-Okt-2002
Datum des Eintrags: 16-Mär-2004
Fakultät: SE - Sonstige Einrichtungen
Fachrichtung: SE - INM Leibniz-Institut für Neue Materialien
Sammlung:INM
SciDok - Der Wissenschaftsserver der Universität des Saarlandes

Dateien zu diesem Datensatz:
Datei Beschreibung GrößeFormat 
lue.pdf10,96 MBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.